成年永久一区二区三区免费视频

  • <button id="oqug6"></button>
    Integrity first
      Integrlty first,service fist
    全屏通欄廣告背景
    導航菜單
    全站搜索
    搜索
    Hotline:0571-86688649
    All our efforts are just for your worries!
    Hangzhou Sansi Instrument Co., Ltd.
    文章正文
    Concrete pressure bleeding test procedure
    作者:管理員    發布于:2019-09-02 15:35:37    文字:【】【】【
    1. Instrument name: SY-2 concrete pressure water meter
    2. Main use: It is suitable for the pressure bleeding test of concrete mixture with the largest particle size of not more than 40mm.
    3. Performance index: The maximum range of the pressure gauge is 6Mpa, and the minimum division value is not more than 0.1Mpa.
    4, environmental requirements: room temperature is 20 ± 2 ° C, relative humidity is not less than 50%
    5, operating procedures:
     1. The top cover was opened and the mash mixture to be tested was placed in a test cylinder (about 2-3 cm from the top). The crucible was evenly 25 times from the periphery to the center, and weighed.
    2. Tighten the check valve clockwise (pressure shows 35-40Mpa) piston pressure (3.5-4.0Mpa) and maintain pressure.
    3. When the pressure reaches 40 Mpa, immediately open the bleeding valve, connect the bleeding water into the 1000ml measuring cylinder, and start timing at the same time, and read the bleeding water 101 V10, V140 in 10 seconds and 140 seconds.
    4. After the test is completed, turn the check valve back in the counterclockwise direction and depressurize. Remove the lower base, and tighten the check valve clockwise on the upper release frame. The pressure, the block and the piston will automatically fall off and then the check valve will be turned back counterclockwise to depressurize. Open the upper part and press the jack piston back.
    5. After the test is completed, the instrument should be rinsed with water and dried.
     
     Hangzhou Sansi Instrument Co., Ltd. Main Products:
    Anchor dynamometer, geotechnical instrument, building test instrument, highway instrument, cement test instrument, asphalt instrument, analytical laboratory instrument, sputum test instrument, various analytical standard sieve, one year warranty, lifetime maintenance
    Sales hotline: 0571-86688649
    QQ: 2362915870

    Tel :0571-86688649
    Fax : 0571-86688346
    Tel:13567560820 Manager Chen
              13216192676 Manager Wang Lili
    Rul:www.antiwarstickers.com
    Mail: hzssyq@126.com
    Add:No. 601, Jiangling Road, Binjiang District, Hangzhou


    新聞中心

    NEWS CENTER
    Article classification
    當前位置
    全屏通欄廣告背景

    Sweep the phone preview

    FAX: 0571-86688346
    TEL: 0571-86688649
    URL:www.antiwarstickers.com
    ADD: No. 601, Jiangling Road, Binjiang District, Hangzhou
    自定模版
    向下滾動顯示返回頂部
    TOP
    成年永久一区二区三区免费视频
  • <button id="oqug6"></button>
  • Hangzhou Sansi Instrument Co., Ltd.

    Hangzhou Sansi Instrument Co., Ltd. all rights reservedTechnical Support:7m 

    Business Registration Number:91330108552653595D